|
Модель
|
DG-IPS33064PFM
|
|
Interface
|
4*10/100/1000Base-T PoE ports (Data/Power)
2*100/1000M uplink SFP fiber slot ports (Data)
1 * RS232 console port (115200,N,8,1)
2 sets of V+, V- redundant DC power interface (5 Pin Phoenix terminal)
|
|
PoE Port
|
Port 1-4 can support IEEE802.3af/at POE standard
|
|
Network Protocol
|
IEEE802.3 10BASE-T; IEEE802.3i 10Base-T;
IEEE802.3u 100Base-TX;
IEEE802.3ab 1000Base-T;
IEEE802.3z 1000Base-X;
IEEE802.3x
|
|
PoE Standard
|
IEEE802.3af/at
|
|
Ethernet Port Feature
|
10/100/1000BaseT (X) automatic detection, full / half duplex MDI/MDI-X adaptive
|
|
SFP Port Characteristic
|
Gigabit SFP optical fiber interface, default matching optical modules, need to buy separately, (optional order mode / multi-mode, single fiber / double fiber optical module.
|
|
Forwarding Mode
|
Store and Forward(Full Wire Speed)
|
|
Switching Capacity
|
128Gbps (Non-blocking)
|
|
Forwarding Rate@64byte
|
8.93Mpps
|
|
MAC
|
8K
|
|
Buffer Memory
|
4M
|
|
Twisted Pair Transmission
|
10BASE-T: Cat3,4,5 UTP(≤100 meter)
100BASE-TX: Cat5 or later UTP(≤100 meter)
1000BASE-T: Cat5e or later UTP(≤100 meter)
|
|
Optical Cable
|
Multi mode: 850nm 0 ~ 550M,single mode: 1310nm 0 ~ 40KM, 1550nm 0 ~ 120KM.
|
|
Power Supply Pin
|
1/2 (+), 3/6 (-) 4-core power supply
|
|
Operating Voltage
|
DC power supply, DC48-57V ultra-wide supply voltage, 5P Phoenix terminal connection, support anti-reverse protection
|
|
Max / Average Power Per Port
|
30W/15.4W
|
30W/30W
|
|
Total PWR / Input Voltage
|
60W (48-57VDC)
|
120W (48-57VDC)
|
|
Power Consumption
|
Standby:<6W;Full load:<60W
|
Standby:<7W;Full load:<120W
|
|
LED
|
Power Indicator : PWR (green) ;system indicator:SYS(green); Network Indicator: Link/Act (yellow);SFP Indicator: L/A (green); PoE Indicator: PoE (green)
|
|
Power Supply
|
No, see accessories information table to buy and use
|
|
Operation TEMP / Humidity
|
-40~+80°C;5%~90% RH Non condensing
|
|
Storage TEMP / Humidity
|
-40~+85°C;5%~95% RH Non condensing
|
|
Dimension
|
145*134.5*47.5mm
|
|
Net /Gross Weight
|
<0.7kg /<1.2kg
|
|
Lightning protection / protection level
|
Lightning protection: 6KV 8/20us; Protection level: IP40
IEC61000-4-2(ESD):±8kV contact discharge,±15kV air discharge
IEC61000-4-3(RS):10V/m(80~1000MHz)
IEC61000-4-4(EFT): power cable:±4kV; data cable:±2kV
IEC61000-4-5(Surge):power cable:CM±4kV/DM±2kV; data cable:±4kV
IEC61000-4-6(radio frequency transmission):10V(150kHz~80MHz)
IEC61000-4-8(power frequency magnetic field):100A/m;1000A/m ,1s to 3s
IEC61000-4-9(pulsed magnet field):1000A/m
IEC61000-4-10(damped oscillation):30A/m 1MHz
IEC61000-4-12/18(shockwave):CM 2.5kV,DM 1kV
IEC61000-4-16(common-mode transmission):30V; 300V,1s
FCC Part 15/CISPR22(EN55022):Class B
IEC61000-6-2(Common Industrial Standard)
|
|
Mechanical Properties
|
IEC60068-2-6 (anti vibration)
IEC60068-2-27 (anti shock)
IEC60068-2-32 (free fall)
|
|
Certification
|
CCC;CE mark, commercial; CE/LVD EN60950;FCC Part 15 Class B; RoHS;
|
|
Warranty
|
5 years , lifelong maintenance.
|
|
Business features (only restricted management function models)
|
|
Port
|
Support IEEE802.3x flow control (full duplex)
Support for broadcast storm suppression based on port rate
support speed limit for incoming and offline message traffic, with a minimum particle size of 64Kbps.
Support port temperature protection settings
Support port EEE green Ethernet energy saving configuration
|
|
PoE Management
|
Support total power limit configuration for POE power supply
Support PoE output power allocation per port, close / start af/at
Support PoE output priority configuration per port
Support PoE work status per port display
Support power delay start
Support PoE work and time scheduling
|
|
Layer 3 Function
|
L2+ network management function
Support IPV4/IPV6 management
Support layer3 soft routing (weak three tier) forwarding,
Support different network segments, communication between different VLAN
Support static routing / default routing 128, 1024 ARP software forwarding
|
|
VLAN
|
Support port based VLAN (4K), IEEE802.1q
Support protocol based VLAN
Support Voice VLAN
Support for MAC address-based VLANs
Support Access, Trunk, Hybrid three types of port configuration
Support QinQ configuration
|
|
Port Aggregation
|
Support LACP
Support static polymerization
Support the largest 8 aggregation groups, each aggregation group supports 8 ports.
|
|
Spanning Tree
|
Support STP (IEEE802.1d)
Support STPRSTP (IEEE802.1w)
Support STP MSTP (IEEE802.1s)
|
|
Industrial Ring Network Protocol
|
Support G.8032 (ERPS), support 255 loops at most, and supports 1024 devices per ring.
The self healing time of the ring network is less than 20ms
|
|
Multicast
|
Support IGMP Snooping V1/V2 and support 1024 multicast groups at most.
Support the user's quick departure mechanism
Support MLD Snooping V1/V2
Support multicast VLAN
|
|
Mirror
|
Bi-directional traffic mirroring supporting the basic port
|
|
QoS
|
Support Diff-Serv QoS
Each port supports 8 output queues
Support 802.1p/DSCP priority mapping
Support queue scheduling mechanism (SP, WRR, SP+WRR)
Support priority tag Mark/Remark
Support stream based packet filtering
Support for stream based redirection
Support flow based speed limit
|
|
ACL
|
Support L2 to L4 packet filtering function, can match the first 80 bytes of the message, provide based on the source MAC address, destination MAC address, source IP address, destination IP address, IP protocol type, TCP/UDP port, TCP/UDP port range, VLAN and other definition ACL.
Support ACL based on port and VLAN
|
|
Safety Characteristics
|
Support user grading management and password protection
Support IEEE802.1X authentication / centralized MAC address authentication
Support AAA&RADIUS authentication
Support the number of MAC address learning restrictions
Support MAC address black hole
Support SSH 2.0 to provide secure passwords for user login.
Support SSL to ensure data transmission security
Support port isolation
Support the speed limit function of ARP message
Support IP source address protection
Support ARP intrusion detection function
Support against DoS attacks
Support port broadcast message suppression
Support host data backup mechanism
Binding capabilities of IP+MAC+VLAN+ ports
|
|
DHCP
|
Support DHCP Client
Support DHCP Snooping
Suport DHCP Serve
Suport DHCP Relay
|
|
Management And Maintenance
|
Support Console/AUX Modem/Telnet/SSH2.0 CLI command line configuration
Support WEB network management (HTTPS)
Support FTP, TFTP, Xmodem, SFTP file download management
Support SNMP V1/V2C/V3
Support one bond reduction
Support NTP clock
Support system work log
Support Ping detection
Support cable state detection
Support CPU instant utilization status view
Support link layer discovery protocol LLDP
Support ONV NMS intelligent management center
|
|
System Requirements
|
Web browser: Mozilla Firefox 2.5 or higher, Google browser chrome V42 or higher, Microsoft Internet Explorer10 or later;
Cat5e or later Ethernet cable;
TCP/ IP, network adapter and network operating system (Microsoft Windows, Linux or Mac OS X) installed on on every computer in the network.
|
